Operation details of tire changer machine

The tire remover is the most common large-scale automobile maintenance equipment in the automobile repair plant. It can assist in the disassembly and installation of automobile tires during automobile maintenance, which makes it more convenient and smooth to disassemble the tires in the process of automobile maintenance. At present, there are mainly two types of tire remover: pneumatic tire remover and hydraulic tire remover. Tire remover is relatively large equipment, so we should pay attention to several points in the process of operation to ensure the safety and efficiency of tire replacement.

1. The power supply of tyre remover must be in normal state, and the power supply is in the off position when it is not in working state; The air pressure of the internal unit is at normal pressure, and the air pipe is not connected under the non working condition;

2. Before replacing the tire, check whether the tire frame is deformed, whether the air nozzle is leaking or cracks occur;

3. Unscrew the air nozzle to release the tire pressure, put the tire in the middle of the compression arm, operate the compression arm to separate both sides of the tire from the wheel frame;

4. Operate the switch to remove the reverse tire;

5. When the new tire is installed, the tire is Peugeot upward, and the tires are installed by operating each switch;

6. After the tire is assembled, each switch is placed in the off position.