Shengshi Weiye’s tire changer
Shengshi Weiye's tire changer
Shengshi Weiye's tire changer is used to install and unload car tires, and can replace tires for different vehicles such as cars, motorcycles and heavy trucks. As an indispensable equipment for auto repair shops and 4S stores, are technicians all operating specifications? In addition to professional operational knowledge, how to deal with some problems in actual work? Then i will take you to understand the tips of tyre changer install and changer tyre.
- For soft and thin tires, but the top rubber of tyre should good: when using the air shovel to shovel the tire, you can lift the air shovel control pedal a little while pushing the tire inward to confirm that the shovel is in contact with the tire mouth, then use the leg or your hand against it, prevent the tires from returning, and then step on the control pedal. It is easier to shovel the tires.
- For tires that run for a long time: the tires are subjected to internal air pressure for a long time, and the heat generated by the tires rubbing against the ground causes the tires to bond with the steel rings. When the air shovel is difficult to shovel, you can choose to dissolve the detergent in the water. Use a small brush to brush some solution on the bead and the steel ring. After the solution penetrates into the gap between the fetal lip and the steel ring, use the air shovel. Shovel down the tire
- For tires with a harder tire: you can use the spring steel plate of the car when you are abort, and make the long crowbar to the bird's head. It is easier to use. When lifting the tire, press the tire belly with both hands, about 200mm. When the tire mouth is at the tightest position, press the tire belly with the right arm elbow. At the same time, push the tire clockwise with your left hand to prevent the motor and the triangle from slipping. It also protects the motor very well.
