The guide of removing the tubeless tire operation guide
The guide of removing the tubeless tire operation guide
1 The position between the assembly disc and the rim is adjusted with a lever to allow the assembly disc to closely grip the edge of the tire.
2The pedal rotation control valve rotates the tire while moving the assembly tray toward the tire side.
3 Lift the assembly arm to the non-working position, move it to the outside of the tire, and make sure the assembly hook is facing the tire. Otherwise, press the positioning handle to rotate the assembly head 180°, then lower and hook the bracket.
4 Control the lever to adjust the position between the mounting hook and the tire so that it moves between the tire and the rim and inserts the tire edge to hook the tire.
5 Move the tire down to prevent the tire edge from disengaging from the mounting hook.
6 Move the assembly hook outward until it is on the rim for easy access.
7 Turn the wheel counterclockwise until the tire edge is completely out of the rim.
8 Move the arm to the inside of the tire and use the mounting plate to turn the wheel counterclockwise against the edge of the tire so that the inner tire edge is completely out of the wheel.
9 Remove the assembly disc from the rim, open the locking handle, and lift the assembly arm to move the assembly tray to the other side of the tire.
10 Repeat the above operation until the other side tire edge is completely disengaged.
