Tire changer to remove tires

Tire changer to remove tires

Tire changer for car
a. Remove all air from the tire and remove the balance block on the outer edge of the rim (Figure 2.1);

b. Place the tire in the separation shovel and the rubber tire, place the shovel between the rim and the tire, and then press the tire pedal to separate the rim from the tire (Figure 2.2);

c. Repeat the above operations in other parts of the tire to completely separate the rim from the tire;

d. Place the vertical shaft in the working position, so that the disassembly head is close to the rim, and the cylindrical roller and the rim of the disassembly head are about 2mm (as shown in Figure 2.3), and locked with the locking bar;