Tire Changer Working
Tire Changer Working
When working, please put the lower tire mouth up, do not squat at one time, always observe and pause the lubricant at the same time, and slowly practice more practice.
1. Operation rules for abortion: The power supply of the tire machine must be in a normal state. The power supply is in the off position in the non-working state. The internal air pressure is at normal pressure, and the air duct is not connected in the non-working state.
2. Check if there is any deformation of the tire frame before replacing the tire, and whether the air nozzle has air leakage and cracks.
3. Unscrew the air nozzle to release the tire pressure, place the tire in the middle of the compression arm, and operate the compression arm to separate the two sides of the tire from the wheel frame.
4. Operate each switch to remove the tire.
5. When the new tires are installed, the tires are lifted upwards, and each switch is operated to install the tires.
6. Each switch is placed in the closed position after assembly.
